Its embedded GPS corrects potential configuration errors that usually occur during installation and maintenance.
It has a certified Class I electricity meter
Its photocell enables it to switch on/off as from the moment it is connected, even though it is not connected to the central system.
It works with any luminaire with a NEMA socket of 3, 5 or 7 contacts.
It dims 1-10v or DALI interface drivers
It operates with up to 400 volts, protecting itself and the luminaire from losses of neutral, which might raise voltage to 380 VAC constantly.
It manages up to 1.000 nodes
Based on an industrial PC 12 hours autonomy with a standard 12 VDC battery. Lightning protectionWatchdog to prevent loss of communication with the cellular network Open door sensor
Multiple connections available (3G/4G, CATM1, NBIoT, FO)
Designed to supply actionable information
It indicates what to repair and in what order, combining the moment of appearance of the fault, its type, criticality and location
Performance indicators, accurate information on maintenance’s performance enables the implementation of incentives and penalties to the persons that render this service.
Responsive design that can be used by both the operators at the control center and by maintenance operators with mobile devices in field.
Users’ activity log Access permits per profiles and groups of users with granularity
Once installed in field, the devices may be remotely commissioned.